TM 9-2320-360-10
2-10. ASSEMBLY AND PREPARATION FOR USE (CONT)
c. Adjust Driver's Seat
NOTE
Sit in seat to make
the
following adjustments.
(1) Turn knob (1) clockwise to
increase
cushion
firmness,
counter-clockwise to decrease
cushion firmness.
(2) Push lever (2) to left. Slide seat
(3) forward or backward.
(3) Release lever (2) to lock seat in
place.
(4) Pull up lever (4). Lift self off sea
(3) to raise seat.
(5) Pull up lever (4). Push down on
seat (3) to lower seat.
(6) Release lever (4) to lock seat (3)
in place.
d. Operate Driver's Seatbelt
(1) Insert seatbelt flat metal end (5) in
buckle (6) until dick is heard.
(2) Place lapbelt (7) as low on hips as
possible.
NOTE
Seatbelt does not have self-adjusting lock. Pull shoulder to take
out slack from lapbelt.
(3) Pull shoulder be (10) until lap belt (7) fits snug.
2-116 Change 1
