TM 9-2320-360-10
CAUTION
Avoid using LOW transfer case with transmission selector in 1 (first
range). If using LOW transfer case & 1 (first range), do not exceed
1200 RPM when starting from a stop. If the tractor does not move
prior to reaching 1200 RPM, do not continue to increase engine
RPM. Failure to comply may result in driveline damage.
(4) Set transmission range selector (1) to 1 position.
(5) Release brake pedal (3). Press accelerator pedal (2) to move HET Tractor forward slowly
then increase speed gradually.
(6) Turn HET Tractor gradually to avoid oversteering the vehicle.
(7) Set transmission range selector (1) to 2-5 position when HET Tractor picks up speed and is
moving forward smoothly.
j. If HET Tractor starts to skid:
(1) Release accelerator pedal (2).
(2) Steer in direction of skid until HET Tractor stops skidding.
(3) Press brake pedal (3) lightly when HET Tractor is under control.
(4) Press accelerator pedal (2) slowly and steer HET Tractor on straight course.
k. To park HET Tractor:
(1) Park HET Tractor so it does not face into wind when possible to avoid glass surfaces being
scratches by sand, dust, and damage to radiator.
(2) Clean mud off HET Tractor as soon as possible to avoid damage to paint.
CAUTION
Do not hit axle breathers when cleaning mud from axles.
Damage to axle breathers could result.
Do not direct high-pressure water stream at glass surfaces,
seals, air intake, axle breathers, exhaust outlet, or any other
component of HET Tractor that could be easily damaged by
high-pressure water stream.
NOTE
Ensure axle breather vent caps move freely on breather body.
(3) Clean mud from wheels, brak es, axles, universal joints, steering mechanism, and radiator
as soon as possible.
Change 3 2-186.1 (2-186.2 blank)
