TM 9-2320-360-10
WARNING
Ensure ENGINE START switch on both vehicles is OFF before
connecting NATO slave cables.
Ensure vehicles are not
touching each other. Failure to do so may result in electrical
shock.
Remove all jewelry such as rings, dog tags, bracelets, etc.
when slave starting vehicle. Wearing jewelry may result in
electrical shock.
Do not smoke, have open flame, or make sp arks when slave
starting vehicle. Batteries can explode and cause personnel
injury or death.
CAUTION
Always connect NATO slave cable to disabled vehicle before
connecting it to saving vehicle. Damage to batteries or cable may
result from improperly connecting NATO slave cable.
(5) Remove slave receptacle cap (3) from disabled vehicle.
(6) Remove cap (4) from NATO slave cable (1).
(7) Plug NATO slave cable (1) into slave receptacle (5) on disabled vehicle.
(8) Remove slave receptacle cap (6) from slaving vehicle.
(9) Remove cap (7) from NATO slave cable (1).
(10) Plug NATO slave cable (1) into slave receptacle (8) on slaving vehicle.
(11) Start engine on slaving vehicle (para 2-12) and operate at 1000 rpm.
Assistant starts
engine on disabled vehicle (para 2-12).
(12) Remove NATO slave cable (1) from slave receptacle (5) on disabled vehicle.
(13) Install cap (4) on NATO slave cable (1).
(14) Install slave receptacle cap (3) on disabled vehicle.
(15) Remove NATO slave cable (1) from slave receptacle (8) on slaving vehicle.
(16) Install cap (7) on NATO slave cable (1).
(17) Install slave receptacle cap (6) on slaving vehicle.
(18) Stow NATO slave cable (1) in stowage box (2).
Change 1 2-219
