TM 9-2320-360-10
b. Closing
NOTE
Retaining lip on inside of cover must hook over rear lip on battery
box.
(1) Install cover (1) on battery box (2).
(2) Attach two rubber latches (3) on brackets (4).
(3) Push on handle (5) and slide battery box (2) in.
(4) Install two clevis pins (6) in battery box tray (7). Hook pin bails over pins.
(5) Swing ladder (8) into ladder supports (9).
(6) Install two clevis pins (10) through ladder supports (9) and ladder (8). Hook pin bails over
pins.
c. Follow-On Maintenance
Remove wheel chocks.
Change 1 2-229 (2-230 blank)
