TM 9-2320-366-10-2
2-42. 30K WINCH OPERATION (CONT)
(b)
If cable (12) is too tight and is above tight mark on tension indicator, stop pay out
and perform steps (18) through (20).
(c) If cable (12) passes between loose and tight marks on tension indicator, proceed
to step (22).
CAUTION
Power fairlead tension bolt must not be overtightened. Overtightening
power fairlead tension bolt will put strain on cable, winch motor, and
power fairlead. Failure to comply may result in damage to equipment.
(17) Turn tension screw (13) to the right one complete turn.
(18) Turn tension screw (13) to the left one complete turn.
2-448
