TM 9-2320-366-10-2
(17) Wrap remaining slack in chain (1) around M939/M939A1/M809 front axle (22) to
prevent chain from dragging on ground.
CAUTION
Position lower brackets between front bumper attaching parts. Lifting
extensions must be pulled tight against front bumper and all slack in
chain removed. Failure to comply may result in damage to equipment.
NOTE
Operating crank handles of load binders will remove slack from chain.
(18) Remove slack in chain (1), using both load binders (2), until lifting extensions (3) are
against M939/M939A1/M809 front bumper (23).
2-589
