TM 9-2320-366-10-2
(16) Start engine of service vehicle (para 2-27a or b).
(17) Position PTO switch (12) to on.
CAUTION
Keep tachometer within 1,250-1,450 rpm when Power Take-Off (PTO) is
engaged. Failure to comply may result in damage to equipment.
NOTE
In the event of a tachometer failure a HAND THROTTLE lever positioned to
L is approximately 1,250-1,450 rpm.
(18) Set engine speed to 1,250-1,450 rpm or place HAND THROTTLE lever (13) to L.
b. Operation of Disabled Vehicle Hydraulic Systems.
NOTE
Perform steps (1) and (2) if disabled vehicle MHC must be stowed.
(1) On disabled vehicle, position PRIMARY CIRCUIT SELECTOR VALVE (1) to CRANE.
2-855