TM 9-2320-366-10-2
3-21. M1090/M1094 TROOPSEAT KIT INSTALLATION/REMOVAL
(MODIFIED)
This task covers:
a. Installation
b. Removal
INITIAL SETUP
Tools and Special Tools
Equipment Conditions
Wrench, Adjustable, 8 in. (Item 50,
Engine shut down (para 2-27f).
Tools and Special Tools
Personnel Required
Screwdriver, Flattip (Item 38, Appendix
(2)
a. Installation.
CAUTION
Ensure seat post is flush with
dump body floor prior to
tightening bolts.
Failure to
comply may result in damage to
equipment.
NOTE
Left and right troopseats are
installed the same way. Left
side shown.
Steps (1) through (25) require
the aid of an assistant.
(1) Install three dump body stakes (1) in
dump body (2).
(2)
Install three bolts (3) from outside of
dump body (2) into three dump body
stakes (1).
3-254
Change 2
