TM 9-2320-366-10-2
3-22. BUMPERETTE KIT INSTALLATION/REMOVAL
This task covers:
a. Installation
b. Removal
INITIAL SETUP
Equipment Conditions
Engine shut down (para 2-27f).
a. Installation.
NOTE
Perform steps (1) through (7) on
all models except M1088/
M1089.
LH and RH bumperettes are
installed the same way. RH
side shown.
(1) Remove shackle pin (1) and shackle (2)
from frame rail (3).
(2) Install bumperette (4) on frame rail (3)
with pin (5).
(3) Install linchpin (6) in pin (5).
(4) Install pin (7) in bumperette (4).
(5) Install linchpin (8) in pin (7).
3-262
Change 2