TM 9-2320-387-10
Table 2-2. Preventive Maintenance Checks and Services (Cont'd).
Location
Crewmember
Not Fully Mission
Item
Item to
Interval
Procedure
Capable If:
No.
Check/
Service
DRIVER (M1114 AND
M1151 ONLY)
15
Before
Weapon
NOTE
Station
Weapon station binding
should be checked with
weapon system or equivalent
weight applied to turret.
Refer to appropriate system
TM to determine weight
of weapon system.
a. Check weapon station for
a. Weapon station
binding by rotating 360 in both
binds.
directions at least five times.
b. Check armament mounting
b. Armament weapons
plate and bearing sleeve for
required for missions
security of mounting and
and mounting plate or
obvious damage that would
bearing sleeve missing,
impair operation.
or any damage that will
prevent or impair
mounting of armament
weapons.
DRIVER
16
During
Controls
a. Monitor fuel gauge.
and
Indicators
b. Monitor engine oil pressure b. Engine oil pressure
gauge.
gauge reads less than
approximately 40 psi
(276 kPa) under
normal driving con-
ditions or less than
6 psi (41 kPa) at idle.
c. Monitor coolant temperature c. Coolant
gauge.
temperature gauge
reads greater than
250F (120C) and/or
overheat lamp
illuminates.
Change 3
2-39