TM 9-2320-387-10
(4) Continue powering in winch cable (3) under load until approximately
four feet (1.2 m) from hook. Disconnect load and power in, keeping cable taut, until
hook clevis touches fairlead roller (13). Clevis should hang freely with less than one
foot (.31 m) of cable exposed.
e. Securing Winch After Operation.
(1) Move levers (1) and (5) to
FREE positions and rotate drum by
hand to
retrieve remaining cable.
(2) Remove hand controller connector (9) from controller plug (8) and place
remote control (6) in stowage compartment (7).
(3) Move lever (1) to LOW position and lever (5) to HIGH position to lockup
winch (4)
(4) Install cap (10) on controller plug (8).
1
7
2
6
1
5
~
5
3
4
9
8
6
~
13
10
11
12
Change 2
2-93