TM 9-2320-387-10
Table 3-1. Troubleshooting (Cont'd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
20. EXCESSIVE OR UNEVEN TIRE WEAR
Step 1. Check tires for proper inflation pressure.
Step 2. Other causes.
Notify unit maintenance.
21. VEHICLE WANDERS TO ONE SIDE ON LEVEL PAVEMENT
Step 1. Check tires for proper inflation pressure.
Step 2. Other causes.
Notify unit maintenance.
STEERING
22. HARD STEERING
Step 1. Check tires for proper inflation pressure.
Step 2. Check power steering reservoir for low fluid level (para. 3-20).
Step 3. Check for broken or missing drivebelt.
Notify unit maintenance if drivebelt is broken or missing.
Step 4. Check power steering oil cooler for bent fins or any other air flow
obstructions.
Remove obstructions if fins are not damaged.
Notify unit maintenance if power steering oil cooler is damaged.
Step 5. Other causes.
Notify unit maintenance.
WINCH
23. ELECTRIC WINCH STOPS DURING NORMAL OPERATION
Step 1. Wait 2 minutes and attempt winch operation again.
If not, engage clutch lever.
Step 3. Check to see if voltmeter is in red or yellow (engine not running).
Start engine and charge batteries.
Step 4. Other causes.
Notify unit maintenance.
Change 2
3-6.1