TM 9-2330-203-14&P
4-22. MASTER CYLINDER REPLACEMENT (M197A1 AND M198A1).
This task covers:
a Removal
c
Installation
b Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Pressure released from service brake system
One washer
One gasket
Tools/Test Equipment:
General mechanic's tool kit
Drain pan
a. REMOVAL
NOTE
Use a drain pan to catch any draining brake fluid. Clean up all spills.
1.
Place a suitable container under master cylinder (1).
2.
Disconnect hose assembly (7) from multiple connector (10).
3.
Remove three nuts (12), lockwashers (13), and master cylinder (1) from mounting bracket. Discard lockwashers.
4-44