TM 9-2330-203-14&P
4-26. INTERVEHICULAR AIR HOSE AND AIR COUPLING MAINTENANCE (Con't).
2.
Open stowage compartment cover (5).
3.
Remove two locknuts (3) and screws (6) and remove clamp (4). Discard locknuts.
4.
Disconnect intervehicular air hose (1) from connector (M197 and M198) (7) or terminal bolt (M197A1 and
M198A1) m (7)and remove from dolly.
b. DISASSEMBLY
1.
Remove air coupling (8) from adapter body (14).
2.
Remove preformed packing (9) from air coupling (8). Discard preformed packing.
3.
Remove plug (10), spring (11), pin (13), and plunger (12) from air coupling (8).
4.
Remove adapter body (19) from compression nut (17).
5.
Pull adapter body (19), sleeve (18), compression nut (17), and spring (16) off hose (15). Discard sleeve.
6.
Repeat steps 4 and 5 for adapter body (14) on other end of hose (15).
c. ASSEMBLY
NOTE
Apply antiseizing tape to all male threads.
1.
Assembly spring (16) on rear of compression nut (17).
2.
Install spring (16) and compression nut (17) on hose (15).
4-58