TM 9-2330-203-14&P
4-36.
PRESSURE TANK REPLACEMENT (Con't).
2.
M197A1 and M198A1:
(a)
Disconnect tube assembly (12) from elbow (11).
(b)
Remove elbow (11) from pressure tank (10).
(c)
Remove nut (13), lockwasher (14), and bolt (16) from each upper clamp (9) and each lower bracket (15).
Remove pressure tank (10) from frame. Discard lockwashers.
(d)
Remove two nuts (17), lockwashers (18), and bolts (8) securing upper clamps (9) to lower brackets (15).
Remove upper clamps and lower brackets from pressure tank (10). Discard lockwashers.
b.
INSTALLATION
1.
M197A1 and M198A1:
(a)
Install each lower bracket (15) on frame using bolt (16), new lockwasher (14), and nut (13).
(b)
Rest pressure tank (10) on lower brackets (15).
TA510724
4-85
