TM 9-2330-203-14&P
APPENDIX G
ILLUSTRATED LIST OF MANUFACTURED ITEMS
Section I. INTRODUCTION
G-1. SCOPE.
a.
This appendix includes complete instructions for making items authorized for fabrication.
b. All bulk materials needed for manufacture of an item are listed by part number or specification number in the
manufacturing instructions.
c. When manufacturing items, ensure that the appropriate tools are used to cut and shape materials. Bend tubes
to configurations required and be careful not to kink tubing. Reuse old connector and fittings whenever possible. Ensure
that tubing is clean before installing after fabrication.
Section II. MANUFACTURING INSTRUCTIONS
NOTES:
1.
Make from NSN 4710-00-541-6887, Part Number MIL-T-3520 stock.
2.
Cut ends of tube square.
3.
Remove burrs from inside of tube.
Figure G-1. Tube.
TA510757
G-1/(G-2 Blank)
