TM 9-2330-211-14&P
4-30. AIRBRAKE CHAMBER (Con't)
ACTION
REMARKS
ITEM
LOCATION
Using pliers, screw on until two turns of thread are
16.
Pushrod (12)
Clevis (2)
exposed.
a. Aline clevis (2) with slack adjuster (15).
17.
Clevis pin (1)
Clevis (2) and
b. Try to slide clevis pin (1) through clevis (2) and
slack adjuster (15)
slack adjuster (15).
c. If clevis pin (1) slides through clevis (2) and slack
adjuster (15), go to step 19.
d. If clevis pin (1) does not slide through clevis (2)
and slack adjuster (15), go to step 18.
18.
in. wrench, turn hex head (14) so that clevis
Hex head (14)
Using
Slack adjuster (15)
pin (1) slides through clevis (2) and slack adjuster
(15).
Using pliers, insert and bend.
Cotter pin (13)
19.
Clevis pin (1)
Nut (3)
Pushrod (12)
Using
in. wrench, tighten against clevis (2).
20.
FOLLOW-ON MAINTENANCE:
Perform minor brake adjustment (para 4-20).
Remove chock blocks (para 2-5).
Check brake operation.
TASK ENDS HERE
4-31.
EMERGENCY RELAY VALVE
This Task Covers:
b.
lnstallation
a.
Removal
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
Chock blocks installed (para 2-5)
Handle, ratchet, in. drive
Air released from system (para 3-8).
Socket,
in., in. drive
Materials/Parts:
Wrench, open-end,
in.
Antiseize tape (Item 15, Appendix E)
Wrench, open-end, in.
Marker tags (Item 14, Appendix E)
Wrench, open-end, in.
Wrench, open-end, in.
Personnel Required: Two
4-85
