TM 9-2330-213-14&P
4-53. REAR SUPPORT LEG REPLACEMENT (M105 SERIES) (Con't).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent P-D-680 is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open frame or excessive
heat. The solvent's flash point is 100F-130F (38C-59C). If you become dizzy
while using cleaning solvent, immediately get fresh air and medical help, If solvent
contacts eyes, immediately wash your eyes and get medical aid.
1.
Clean all parts with dry cleaning solvent. Dry thoroughly.
2.
Inspect ail parts for damage. Replace any damaged parts.
INSTALLATION
c.
1.
Install bracket (16) to frame (3) with two screws (4), new Iockwashers (2), and nuts (1),
2.
install bracket (11) to frame (3) with two screws (13), new Iockwashers (14), and nuts (15).
Install rear support leg (7) to bracket (11) with screw (12) and nut (5). Install grease fitting (6).
3.
4.
Install spring (10), pin (8), and new cotter pin (9) in rear support leg (7).
5.
Lubricate roar support leg (7) at grease fitting (6) (Chapter 3, Section 1).
4-89
