TM 9-2330-213-14&P
4-64. SIDE DOOR MAINTENANCE (Con't).
d.
LEFT SIDE BATTERY DOOR DISASSEMBLY
1.
Remove eight thumbscrews (33), four bands (34), two covers (35), pans (36), and liners (37) from side
door (6). Discard liners.
WARNING
Battery acid (electrolyte) is extremely dangerous. Use care when removing battery
shop door caps (39). Serious injury to personnel may result if battery acid contacts
skin or eyes.
2.
Remove two caps (39) from side door (6) and drain any battery acid into a suitable container.
Remove four nuts (24), Iockwashers (25), two plates (26), four bolts (29), and two folding arms (9 and
3.
13) from side door (6). Discard Iockwashers.
Remove 12 screws (27), rear hinge (11), and seal (28) from side door (6).
4.
Remove nine screws (23), front hinge (8), and seal (22) from side door (6).
5.
Remove four screws (21 ) and handle (20) from side door (6).
6.
NOTE
To l nsuro proper adjustment for installation, position of plates (30) should b.
marked.
7.
Mark position of plates (30). Remove four bolts (32), Iockwashers (31), and plates from side door (6).
Discard Iockwashers.
Remove 16 nuts (38), screws (41), and eight spring nuts (40) from side door (6).
8.
Remove reflector (para 4-72),
9.
e.
LEFT SIDE BATTERY DOOR ASSEMBLY
1.
Install reflector (para 4-72).
Install eight spring nuts (40) on side door (6) with 16 screws (41) and nuts (38).
2.
Position four plates (30) on side door (6) as marked, and install four new Iockwashers (31) and bolts (32).
3.
4.
Install handle (20) on side door (6) with four screws (21).
Install seal (22) and front hinge (8) on side door (6) with nine screws (23).
5.
Install seal (28) and rear hinge (11) on side door (6) with 12 screws (27).
6.
7.
Install two folding arms (9 and 13) on side door (6) with four bolts (29), two plates (26), four new
Iockwashers (25), and nuts (24).
install two caps (39) on side door (6).
8.
Position two new liners (37), pans (36), covers (35), and four bands (34) on side door (6) and install eight
9.
thumbscrews (33).
4-124
