TM 9-2330-213-14&P
5-7. WATER TANK BODY MAINTENANCE (Con't).
11.
Rinse water tank (1) repeatedly with warm water, approximately 120F (49 C), to remove all traces of
bleach solution.
12.
Dry water tank (1) completely with forced air heater.
Install drainplug (15). Install discharge valve (para 5-6).
130
Install strainer (10), close cover (12), and tighten wingnut (11) on vent (9).
14.
Close manhole cover (14) and tighten wingnut (13).
15.
c. R E P A I R
1.
Refer to TM 9-237 for instructions on water tank body welding repair.
2.
Refer to TM 43-0139 for instructions on painting water tank body exterior.
INSTALLATION
d.
WARNING
Stand clear of lifting device when raising or lowering water tank (1). Failure to follow
this warning may result in serious injury or death.
1.
Position eight new rubber shock mounts (5) on water tank (1). Carefully lift water tank (1) onto frame (6).
TA505368
5-16
