TM 9-2330-231-14&P
RADIUS ROD - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
REMOVAL- CONTINUED
2. Radius rod (1)
Four nuts (2), two
Using 15/16-inch socket and wrench,
bolts (3), and four
remove.
retainers (4)
3. Axle (5) and
Four bushings (7)
Remove.
hanger (6)
Discard If cracked or rotted.
4. Radius rod (1)
Screw (8)
Using 5/8-inch socket, remove.
5.
Screw (9)
Using 5/8-inch socket, universal, and
extension, remove.
6.
Two spacers (10)
Using mallet and drift, lightly tap to
loosen and remove.
7. Axle (5) and
Four washers (11)
Remove.
hanger (6)
8. Axle (5) to
Radius rod (1)
Remove.
hanger (6)
INSTALLATION
9. Axle (5) to
Radius rod (1)
Place in position.
hanger (6)
10. Axle (5) and
Washers (11)
Place in position.
hanger (6)
11. Radius rod (1)
Spacers (10)
Tap into position using mallet.
12.
Screw (9)
Using 5/8-inch socket, universal, and
extension, install.
13.
Screw (8)
Using 5/8-inch socket, install.
14. Axle (5) and
Bushings (7)
Install.
hanger (6)
15 . Radius rod (1)
Retainers (4), bolts
Using 15/16-inch socket and wrench,
(3), and nuts (2)
install.
4-122
