TM 9-2330-235-14&P
4-31.
HYDRAULIC BRAKE SYSTEM LINES AND FITTINGS REPLACEMENT (M514) (Con't).
b.
INSTALLATION
NOTE
If installing lines from tee at midpoint of trailer to wheel, perform steps 1 through 5.
If Installing hose from master cylinder to tee at midpoint of trailer, perform steps 6 through 8.
1. Position tube assembly (9) for installation.
Secure tube assembly to frame with six screws (13), new
lockwashers (14), and six straps (15).
2. Connect tube assembly (9) to tee (10).
3. Install flatwashers (7), tee (6), flatwashers (5), and bolt (4).
4. Install elbow (11) to tube assembly (9).
5. Connect hose (12) to elbow (11) and tee (6)
6. Position hose (3) for installation Secure hose to frame with screw (18), new lockwashers (17), and clamp (16)
7. Connect hose (3) to tee (10).
8. Connect hose (3) to reducer (2) at master
cylinder (1).
TA505023
4-68
