TM 9-2330-235-14&P
4-53.
REAR LEVELING JACK SUPPORT ASSEMBLY MAINTENANCE (M514) (Con't).
b.
DISASSEMBLY
Inspect sleeve bearings (1 and 2) for damage. If damaged, press out of support (3) and remove.
c.
INSPECTION
1. Inspect support (3) for cracks, breaks, corrosion, or other damage. If damaged , replace entire support assembly.
2. Inspect all other parts for cracks, breaks, corrosion, or other damage. Replace if damaged.
d.
ASSEMBLY
If removed, press sleeve bearings (1 and 2) in support (2).
e.
INSTALLATION
NOTE
Rear leveling jack support assembly consists of two support assemblies bolted to frame. Installation of
one support assembly is described. Installation of other is the same.
1. Install support (3) assembly and two shims (8) on frame with six bolts (6), flatwashers (7), flatwashers (9), and
new locknuts (10).
2. Secure support (3) assembly to frame with two bolts (12), flatwashers (11), flatwashers (4), and new locknuts (5).
3. Repeat steps 1 and 2 for other support (3) assembly, as required.
FOLLOW-ON TASKS:
4-131