TM 9-2330-246-14
4-58. HYDRAULIC BRAKE SYSTEM BLEEDING (Con't).
When air bubbles no Ionger appear, close bleeder
6.
valve (l). Remove plastic tubing (3).
7.
Replenish brake fluid in master cylinder.
Repeat steps 1 through 7 for remaining wheel
8.
cylinders.
Replenish brake fluid in master cylinder then
9.
install filler plug.
3
PRESSURE FEED FILLER BLEEDING
b.
1.
Install pressure feed adapter in master cylinder filler plug hole and connect pressure feed hose to adapter. Fluid
pressure in master cylinder should be 10-20 psi (69-138 kPa). Pressure feed reservoir should contain sufficient
fluid to maintain a constant fluid level in the system during bleeding.
2.
Bleed the system as in manual bleeding (subpara a). Manual operation of brake pedal and replenishment of
brake fluid are not required.
FOLLOW-ON TASKS:
TA700250
4-144