TM 9-2330-246-14
4-61. MASTER CYLINDER REPLACEMENT (Con't).
INSTALLATION
b.
install tube (2) in master cylinder (1),
Install hose clamp (12) and hose (11) on tube (2). Tighten screw in hose clamp.
Install rubber bellows (3) over lip on master cylinder (1). Install retaining ring (4) over rubber bellows.
Install master cylinder (1) on three studs on bracket (6) and on air chamber (7) using three new Iockwashers (9)
and nuts (1 O). Ensure that air chamber pushrod (5) is properly seated in master cylinder piston.
Connect hydraulic line (8) to rear of master cylinder (1).
FOLLOW-ON TASKS:
Bleed brakes (para 4-58).
q
TA700256
4-150
