TM 9-2330-246-14
4-64. PRESSURE TANK REPLACEMENT.
This Task Covers:
a.
Removal
c.
Leakage Test
b.
Installation
d.
Draincock Replacement
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Six Iockwashers
a.
REMOVAL
1.
Open pressure tank draincock (6) to release air from brake system.
2.
Disconnect air tube (5) from relay valve to pressure tank (4).
3.
Remove four nuts (2), Iockwashers (3), screws (7), and pressure tank (4) from mounting bracket (l). Discard
Iockwashers.
4.
Remove two nuts (11), Iockwashers (10), and screws (8). Remove two brackets (9) and two brackets (12) from
pressure tank (4). Discard Iockwashers.
b.
INSTALLATION
1.
Install two brackets (9) and two brackets (12) on pressure tank (4) using two screws (8), new Iockwashers (10),
and nuts (11).
TA700260
4-156