TM 9-2330-246-14
4-82. SPRING HOLDER MAINTENANCE.
This Task Covers:
a.
Removal
d.
Assembly
b.
Disassembly
Installation
e.
c.
Cleaning and Inspection
Initial Setup:
Equipment Condltlons:
Materials/Parts:
One Iockwasher
Two locknuts
Tools/Test Equipment:
Seven rivets (as required)
General mechanic's tool kit
Drill bit set
Electric drill
Rivet gun
a. REMOVAL
NOTE
Spring holders may be mounted with rivets or pins and collars. Pins and collars are
illustrated.
1.
Remove seven rivets or pins (11) and collars (10)
from spring holder (2) and dolly (l). Discard rivets,
if removed.
2.
Remove nut (5), Iockwasher (4), and bolt (3) from
.,-
spring holder (2) and dolly (1). Remove' spring
holder from dolly, Discard Iockwasher.
b.
DISASSEMBLY
1.
Remove two setscrews (6) and locknuts (7) from
pin (9). Discard locknuts.
2.
Remove pin (9) and bearing (8) from spring holder
(2).
TA700290
4-197