TM 9-2330-246-14
4-98. ACCESS COVER, AIR VENT FRAME AND SHIELD ASSEMBLY, AND RADIO
Install hinge (6) on access cover (8) using, new rivets (22).
3.
Install stud (23), retainer (21), and wingnut (20) on access cover (8).
4.
Use adhesive to install two new rubber strips (5 and 12) on access cover (8).
5.
If removed, install studs (1 O) and eyelets (9) in access cover (8).
6.
7.
Install two nuts (13) and thumbscrews (14) in frame (3).
Install each receptacle (17) on frame (3) using two new rivets (16).
8.
Install RFI panel (4) on frame (3) using screws (15), new Iockwashers (2), and nuts (l).
9.
Install frame (3) on door using new rivets (18).
10.
Install hinge (6) and access cover (8) on door using new rivets (7).
11.
Cover hinge (6) with new coated cloth (11).
12.
TA700320
4-235