TM 9-2330-246-14
4-103. POWER ENTRANCE PANEL AND SIGNAL ENTRANCE PANEL REPLACEMENT
(M348A2C, M348A2D, AND M348A2F).
This Task Covers:
a.
Removal
c.
Installation
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Incoming power and signal cables removed,
Adhesive (Item 1, Appendix E)
Coated cloth (Item 10, Appendix E)
Tools/Test Equipment:
Dry cleaning solvent (Item 13, Appendix E)
General mechanic's tool kit
Metal seam sealing tape (Item 27, Appendix E)
Drill bit set
Four gaskets
Electric drill
Z Rivets (as required)
Rivet gun
REMOVAL
a.
NOTE
This procedure Is typical for the power and signal entrance panels Installed on the
M348A2C, M348A2D, and M348A2F semitrailers. Exact configuration may vary from
what is illustrated. Quantity of captive screws and other attaching hardware varies and
Is not specified within the procedure. M348A2C Is illustrated.
1.
Remove rivets (9) securing hinge (8) to frame (l). Remove hinge and cover (6) from frame. Discard rivets.
Remove screws (18) securing frame (1) to semitrailer. Remove frame.
2.
TA700327
4-245
