TM 9-2330-246-14
4-128. HEATER FUEL TANK VENT ASSEMBLY AND TUBE REPLACEMENT (M373A2D AND
M373A5) (Con't).
c. TUBE REMOVAL
Remove adapter body (4) from vent assembly (2).
1.
2.
Remove adapter body (4) from nut (5).
Remove nut (5) and sleeve (6) from tube (7).
3.
4.
Remove grommet (8) from tube (7). Discard grommet.
Pull tube (7) through frame (1) and chassis.
5.
At opposite end of tube (7), remove four screws (12) and Iockwashers and remove flange (11) from fuel tank and
6.
from elbow (9). Discard Iockwashers.
7.
Remove elbow (9) and tube (7) from conduit (10).
TUBE INSTALLATION
d.
Install tube (7) in conduit (1O).
1.
Install elbow (9) on conduit (10).
2.
Install flange (11) on elbow (9). Install flange on fuel tank with four screws (12) and new Iockwashers.
3.
TA700371
4-308