TM 9-2330-251-14&P
4-30. BRAKESHOE REPLACEMENT (M416) (Con't).
1.
Remove cotter pin (16) and pin (2) securing handbrake cable assembly (1) to pawl (4). Discard cotter
pin.
Remove spring (8) from brakeshoes (7 and 12).
2.
Remove 2 nuts (14) and Iockwashers (13) securing 2 anchor pins (9) to backing plate (5). Remove
3.
anchor pins, plate (10), and 2 cams (11). Discard Iockwashers.
4.
Remove brakeshoe (7) from backing plate (5).
Remove strut (6) from backing plate (5).
5.
6.
Remove cotter pin (15) and pin (3) securing pawl (4) to strut (6). Remove pawl. Discard cotter pin,
7.
Remove brakeshoe (12) from backing plate (5).
b.
CLEANING AND INSPECTION
WARNING
DO NOT handle brakeshoes, brakedrums, or other brake components unless area
has been properly cleaned. There may be asbestos dust on these components
which can be dangerous if you touch it or breathe it. Wear an approved filter mask
and gloves. Never use compressed air or a dry brush to clean brake components.
Dust may be removed using an industrial-type vacuum cleaner. Clean dust or mud
away from brake components with water and a wet, soft brush or cloth. Failure to
follow this warning may result in serious illness or death to personnel.
TA503926
4-42
