TM 9-2330-251-14&P
4-50. IDENTIFICATION PLATE REPLACEMENT (Con't).
WARNING
Safety goggles must be worn when removing rivets (3) from identification plate (1).
Failure to follow this warning may result in serious eye injury.
Using hammer and chisel, cut heads off 6 rivets (3). Remove identification plate (1) from cargo body (2).
3.
Drive 6 rivet (3) bodies out of cargo body (2). Discard rivets.
4.
NOTE
Ensure that information on ail plates is Iegible.
Install identification plate (1) on cargo body (2) with 6 new rivets (3).
1.
Install identification plate (10) on rear of chassis (8) with 8 screws (9).
2.
Install identification plate (7) on right side of chassis (8) with 2 screws (6), new Iockwashers (5), and nuts
3.
(4) .
TA503967
4-92
