TM 9-2330-357-14&P
4-46. HUB AND BRAKEDRUM MAINTENANCE (Con't).
e. INSTALLATION
NOTE
Bearings and races should be packed with
grease in accordance with TM 9-214 before in-
stallation.
1. Install race (11), bearing (12), new oil seal (13),
and race (9) into hub and brakedrum assembly
(10).
2. Install hub and brakedrum assembly (10) to
spindle (14).
3. Install bearing (8), inner nut (7), keywasher (6),
and outer nut (5). Adjust wheel bearing by torquing
inner nut to 40 lb.-ft. (54 N.m).
4. Install new gasket (4), cap (3), five new lockwash-
ers (2), and screws (1).
FOLLOW-ON TASKS:
Install wheel and tire (para 3-11).
Lower rear wheels to ground using outriggers (para 2-12).
TA706495
4-93
