TM9-2330-358-14&P
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services (PMCS)
D-DURING
A-AFTER
B-BEFORE
INTERVAL
EQUIPMENT IS
ITEM TO BE INSPECTED
NOT READY/
PROCEDURES: CHECK FOR AND HAVE
NO.
B D A
AVAILABLE IF:
RRPAIRED. FILLED. OR ADJUSTED AS NEEDED
LIGHTS AND REFLECTORS
6
NOTE
An assistant is required while
checking the brake lights.
a. Check for damage and presence of
q
One or more lights
b. If tactical situation permits,
q
inoperative or
connect intervehicular cable to the
rnissing.
towing vehicle. Operate the vehicle
light switch through all settings and
check the lights.
KINGPIN
7
Damaged, cracked,
a. Inspect kingpin for cracks and
q
broken, or missing
bends.
kingpin.
Cracked upper fifth
b. Inspect upper fifth wheel plate
q
wheel plate.
for cracks and dents.
LANDING GEAR
8
a. When cranking landing leg, check that
q
each leg moves smoothly and does not bind.
Pull out handcrank and check for high
speed operation. Push in for low speed
operation.
b. Inspect handcrank, gearbox, and
Landing gear/leg
inoperative.
landing leg foot for secure mounting.
Check that handcrank holder stows
handcrank securely. Make sure other
leg moves equally with side being
cranked.
2-14
