TM9-2330-368-14 & P
2-5. LANDING GEAR (cont)
c. Crank Stow Bracket (4). Stows the crank
when the crank is not in use.
d. Leg (5). Supports the weight of the trailer
when extended. Slides into housing when retracted.
e. Landing Gear Shoe (3). Keeps the legs
from sinking into the ground.
f. Hitch Pin Assembly (6). Locks the landing
gear in vertical or horizontal position. Removed to
turn unit.
I 2-6. STORAGE BOX I
The storage box ( l), located in the trailer tongue,
is used to stow the intervehicular cable, fire
extinguisher, SPLL adapter, lug wrench and
other tools. The box is fitted with a heavy gauge,
steel cover (2), which is hinged at the rear end. A
support strut (3) is provided to hold the cover
open when necessary and a latch (4) to permit
locking the cover down.
I 2-7. FIRE EXTINGUISHER I
The fire extinguisher (1) is a standard 10BC type.
It is mounted in quick release brackets (2) inside
the storage box.
2-8. SPLL ADAPTER
The Self Propelled Loader Launcher (SPLL)
adapter (3) is used only when the HEMAT must
be connected for emergency SPLL operation. The
adapter extends the towing lunette coupler (4)
to allow additional trailer-vehicle clearance.
TA252138
2-5
