TM 9-2330-371-14&P
ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVlCES (PMCS) - CONTINUED
S-SEMIANNUALLY
Q-QUARTERLY
ITEM TO BE INSPECTED
INTERVAL
P R O C E D U R E : CHECK FOR AND HAVE REPAIRED, FILLED, REPLACED,
ITEM
S
OR ADJUSTED AS NEEDED. PERFORM ALL OPERATOR PMCS FIRST.
Q
NO.
AIR/HYDRAULIC SYSTEM
4.
a. Check all lines for leaks, kinks, cracks, and presence of
mounting clamps.
b. Check master cylinder (1) for secure mounting, serviceability,
and leaks.
c. Service air filters (page 4-108).
NOTE
Master cylinder (1) must be filled to within 1/2-inch of top.
BRAKES
5.
a. Check chambers (2) and lines for dents, cracks, leaks, and
corrosion.
b. Inspect brake lining (3) thickness, Replace if lining is within
0.030 inch (0.762 mm) of rivet heads. Check drum for evidence of
overheating.
TA224216
4-14
