TM 9-2330-371-14&P C01
SECTION I
alphanumeric sequence (i.e., vertical arrangement of
(5) Part numbers for bulk materials are
letter and number combination which places the first
referenced in this column in the line item entry for the
Ietter or digit of each group in order A through Z, followed
item to be manufactured/fabricated.
by the numbers 0 through 9 and each following letter or
(6) When the item is not used with all serial
digit in like order.)
numbers of the same model, the effective serial
(1) CAGEC column. The Commercial And
numbers are shown on the last line(s) of the description
Government Entity (CAGE) Code (C) is a 5 digit
(before UOC). Not applicable.
alphanumeric code used to identify the manufacturer,
(7) The usable on code, when applicable (see
distributor or Government agency, etc., that supplies the
paragraph 5, Special information).
item.
(8) In the Special Tools List section, the basis of
(2) PART NUMBER column. Indicates the
issue (BOI) appears as the last line(s) in the entry for
primary number used by the manufacturer (individual,
each special tool, special TMDE and other special
firm, corporation or Government activity), which controls
support equipment. When density of equipments
the design and characteristics of the item by means of its
supported exceeds density spread indicated in the basis
engineering drawings, specifications standards, and
o f issue, the total authorization is increased
inspection requirements to identify an item or range of
proportionately.
items.
(9) The statement "END OF FIGURE" appears
(3) STOCK NUMBER column. This column lists
just below the last item description in Column 5 for a
the NSN for the associated part number and
given figure in both Section II and Section Ill.
manufacturer identified in the PART NUMBER and
f. QTY (Column (6)). The QTY (quantity per figure
CAGEC columns to the left.
column) indicates the quantity of the item used in the
(4) FIG. column. This column Iists the number of
breakout shown on the illustration figure, which is
the figure where the item is identified/located in Section
prepared for a functional group, subfunctional group or
II and Ill.
an assembly. A "V" appearing in this column in lieu of a
(5) ITEM column. The item number is that
quantity indicates that the quantity is variable and the
number assigned to the item as it appears in the figure
quantity may vary from application to application.
referenced in the adjacent figure number column.
4. Explanation of Columns (Section IV).
c. FIGURE AND ITEM NUMBER INDEX.
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) FIG. column. This column Iists the number of
(1) STOCK NUMBER column. This column lists
the figure where the item is identified/located in Section
the NSN by National item identification number (NIIN)
II and Ill.
sequence. The NIIN consists of the last nine
(2) ITEM column. The item number is that
NSN
number assigned to the item as it appears in the figure
digits of the NSN (i.e., 5305-01-674-1467)
referenced in the adjacent figure number column.
NIIN
(3) STOCK NUMBER column. This column lists
When using this column to locate an item, ignore the first
the NSN for the item.
4 digits of the NSN. However, the complete NSN should
(4) CAGEC column. The Commercial And
be used when ordering items by stock number.
Government Entity (CAGE) Code (C) is a 5 digit
(2) FIG. column. This column lists the number of
alphanumeric code used to identify the manufacturer,
the Figure where the item is identified/located. The
distributor or Government agency, etc., that supplies the
figures are in numerical order in Section II and Section
item.
III.
(5) PART NUMBER column. Indicates the
(3) ITEM column. The item number identifies
primary number used by the manufacturer (individual,
the item associated with the figure listed in the adjacent
firm, corporation
or Government activity), which
FIG. column. This item is also identified by the NSN
controls the design and characteristics of the item by
listed on the same line.
means of its engineering drawings, specifications
standards and inspection requirements to identify an
b. PART NUMBER INDEX. Part numbers in this
item or range of items.
index are listed by part number in ascending
F-4
