TM9-2330-372-14&P
(2) FIG. column. This column lists the number of the figure where the item is identified/located. The figures
are in numerical order in Section II and Section III.
(3) ITEM column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each group
in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1) CAGEC column. The Commercial and Government Entity (CAGE) Code (C) is a 5-digit alphanumeric
code used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
(2) PART NUMBER column. Indicates the primary number used by the manufacturer (individual, firm,
corporation, or Government activity), which controls the design and characteristics of the item by means of its
engineering drawings, specifications standards, and inspection requirements to identify an item or range of items.
(3) STOCK NUMBER column. This column lists the NSN for the associated part number and manufacturer
identified in the PART NUMBER and CAGE columns to the left.
(4) FIG. column. This column lists the number of the figure where the item is identified/located in Sections II
and 111.
(5) ITEM column. The item number is that number assigned to the item as it appears in the figure referenced
in the adjacent figure number column.
F-5. Special Information.
a. USABLE ON CODE. The usable on code appears in the lower left corner of the Description column heading.
Not Applicable.
Code
Used On
R0N
XM1048
RO2
XM1034
b. FABRICATION INSTRUCTIONS. Bulk materials required to manufacture items are listed in the Bulk Material
Functional Group of this RPSTL. Part numbers for bulk materials are also referenced in the Description column of the
line item entry for the item to be manufactured/fabricated. Detailed fabrication instructions for items source coded to be
manufactured or fabricated are found in Appendix G.
F-7
