TM -9-2330-373-14 & P
2-16. INSTALLING AND REMOVING PLATFORM BRIDGE
INSTALLING PLATFORM BRIDGE
1. Remove two quick release pins (1) and release
four clamps (2) securing platform bridge (3) on
rear platform of XM971E3 semitrailer.
2. Set platform bridge aside.
1. Pin
2. Clamp
3. Bridge
3. Drive both XM971E2 and XM971E3 semitrailers
so that rears of both vans are back to back.
4. Lower both platforms (para 2-15).
5. Back one van towards the second van to allow
enough space between the rear platforms for the
platform bridge.
6. Place horizontal side of bridge (1) on each
horizontal side of each rear platform. Secure
with four clamps (2) and two quick release pins
(3).
7. Install ladder (4) (para 2-18).
1.
Platform bridge
2.
Clamp
3.
Pin
4.
Ladder
TA 314722 2-24
2-24
