TM 9-2330-373-14 & P
Section I. REPAIR PARTS,SPECIAL TOOLS;TEST,MEASUREMENT AND
DIAGNOSTIC EQUIPMENT (TMDE);AND SUPPORT EQUIPMENT
4-1. COMMON TOOLS AND EQUIPMENT
For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE)
applicable to your unit.
4-2. SPECIAL TOOLS, TEST, MEASUREMENT AND DIAGNOSTIC EQUIPMENT (TMDE); AND
SUPPORT EQUIPMENT
Special tools are not required for this equipment.
4-3. REPAIR PARTS
Repair parts are listed and illustrated In Appendix F of this manual.
Section II. SERVICE UPON RECEIPT
4-4. GENERAL
When new, used or reconditioned materiel is first received, it is the responsibility of the officer in charge to determine
whether the materiel has been properly prepared for service by the supplying organization and to be sure it is in condition
to perform its function. Inspect all assemblies, subassemblies, and accessories to be sure they are properly assembled,
secure, clean, and correctly adjusted and/or lubricated. Check all tools and equipment to be sure every item is present, in
good condition, clean, and properly mounted or stowed.
4-5. INSPECTING AND SERVICING EQUIPMENT
a. Preliminary Services.
(1) General procedures.
If exterior surface is coated with rust preventive compound, remove it with cleaning solvent (item 3, appendix E).
4-2