TM 9-2330-373-14 & P
Table 4-2.
Troubleshooting (cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
DOORS
29.
DIFFICULTY IN LOCKING OR UNLOCKING DOORS.
Step 1. Check handle door lock, bolt slide fasteners and striker plates for rust and corrosion (para 4-38)
Clean and lubricate.
Step 2. Check if door is hard to lock.
Add shim stock as required under handle door lock and (or) bolt slide
fastener guides (para 4-38)
Step 3. Check for a good weather tight seal when door is in closed and
locked position.
a. Add shim stock as required under striker plate of bolt slide fasteners.
b. Replace defective lock assembly (para 4-38).
30.
DOOR HINGES DO NOT OPERATE PROPERLY.
Step 1. Check for rust on hinge pin.
Remove rust and lubricate.
Step 2. Check for cracked or broken hinge.
Replace defective hinge (para 4-38)
31.
R.F.I. SHIELDING DOES NOT PROVIDE A GOOD BOND.
Check for dust, grime and dirt in door opening.
Clean, wash and dry (para 4-38).
4-35
