TM 9-2330-376-14&P
4 - 2 9 . SERVICE BRAKE MAINTENANCE (Con't).
ASSEMBLY
c.
WARNING
Do not allow grease to contact brakeshoe linings. Linings can absorb grease and oil,
causing early glazing of linings and very poor braking action. Failure to follow this
warning may cause serious Injury or death to personnel.
NOTE
Cable ramp is found on front brakes of all models and on front and rear brakes of
XM1073.
1.
Position cable ramp (59) and backing plate (10) on axle (60) and install twelve screws (58), new Iockwashers
(62), and nuts (61 ).
NOTE
On XM797, XM1061, and M1061A1, front
brakes are equipped with a cable guide brack-
et. Rear brakes have an access cover.
XM1073 front and rear brakes are equipped
with a cable guide cover.
Install cable guide bracket (55) or access cover
2.
(54) on backing plate (10) with two new lock-
washers (56) and nuts (57).
TA700949
4-43