TM9-2330-376-14&P
4 - 3 9 . AIR LINES, HOSES, AND FlTTINGS REPLACEMENT
This Task Covers:
b.
Installation
a.
Removal
Initial Setup:
Materials/Parts:
Equipment Conditions:
Air reservoir pressure drained (para 3-9).
Detergent (Item 6, Appendix E)
Antiseizing tape (item 17, Appendix E)
Tools/Test Equipment:
Six lockwashers
General mechanic's tool kit
NOTE
Illustration shows XM979, XM1061, and M1061A1. XM1073 is similar.
a.
REMOVAL
1.
if removing hose assembly(1), remove air coupling (para 4-38).
Remove hose assembly (1) from coupling (2).
2.
Disconnect tube (5) from straight adapter (4).
3.
4.
Remove coupling (2), identification plate (3), and straight adapter (4).
Remove screw (8), Iockwasher (7), and clamp (6) from tube (5). Discard lockwasher.
5.
Disconnect tube (5) from elbow at air filter (9) and remove. Remove elbow.
6.
TA700971
4-69
