TM 9-2330-381-14
Table 2-1. Operator/Crew Preventive Maintenance Checks and Services
B-Before Operation
D-During Operation
A-After Operation
W-Weekly
Equipment
Item
Interval
ITEM TO BE INSPECTED
is not ready/
no.
B
DA
W
Procedure
available if:
8
STEERING CONSOLE
NOTE
The hydraulic component/system inspection is
a multiple point inspection that must be
performed each time a hydraulic component/
item is encountered.
a. Inspect steering console for condition of kingpin (21),
Any cracks or Class III
steering wedge assembly (22), steering plate (23),
leaks.
steering cylinders (24), hydraulic hoses (25), and slider
bar (26). Check for cracks, dents, leaks, and presence
of lubrication. If semitrailer is coupled to tractor,
ensure that steering wedge is snugly seated in fifth
wheel vee.
b. With semitrailer uncoupled from tractor, check steering
wedge lockwasher (27) for condition. If flat, cracked,
or missing, obtain replacement from unit maintenance
and install.
2-28 Change 1
