TM 9-2330-381-14
2-26.
LOADING AND UNLOADING ABLE PAYLOADS (CONT)
NOTE
Prior to loading, front payload checks must be adjusted to accommodate the offset
of roadwheels on the M1 tank, and the tank's braking system shall be released.
(9) Position streetside front payload chock (10) approximately 10 inches (25 cm) from forward edge of platform.
(10) Position curbside front payload chock (11) approximately 14 inches (35 cm) from forward edge of platform.
(11) Align forward mounting holes of streetside and curbside payload chocks (10 and 11) with fourth hole from
front of outboard payload chock mounting brackets on platform.
(12) Secure each payload chock (10 and 11) with two capscrews (5) and washers (6).
2-94 Change 1
