TM 9-2330-381-14
(12) Make sure CABLE HOLD DOWN lever (22) is ON (pushed away from operator).
(13) Pull DRIVERS SIDE WINCH lever (35) upward momentarily until there is enough slack in drivers side winch
cable (36) to be removed from stow hook (25). Move clevis on winch cable (36) off of stow hook (25) to
unstow winch cable. Continue paying out winch cable (36) until spotter on the ground can reach clevis.
Release lever (35).
(14) Remove and retain cotter pin (26) and shouldered pin (27) from clevis on drivers side winch cable (36).
(15) Remove cotter pin (28) and shouldered pin (29) from auxiliary winch cable clevis (30). Install auxiliary winch
cable clevis (30) over one ear on drivers side winch cable (36) and install shouldered pin (29) and cotter pin
(28).
(16) Engage AUXILIARY WINCH KICKOUT by lifting and rotating lever (10) clockwise. Disengage DRIVERS
SIDE WINCH KICKOUT (20) switch by pulling switch.
2-145
