TM 9-2330-381-14
4-33.
HYDRAULIC CONTROL MODULE JUMPER WIRES (CONT)
REMOVAL
1.
Make sure hydraulic control module door panel is lowered (para. 2-6).
2.
Using two people, remove six capscrews (1), lockwashers (2), and lower panel (3) from hydraulic control module
(4). Carefully remove lower panel (3), with panel door attached, out from under semitrailer and place on platform.
Discard lockwashers.
3.
Using semitrailer electrical schematic (figure FO-1) as a guide, tag and disconnect jumper wires (5 and 6) from
four pressure switches (7).
Change 1 4-133
