TM 9-2330-381-14
7.
Use one person to support front part of steering plate (13) and use lifting device (15) to carefully lift steering plate
(13) off of hydraulic transmission jack (21). Move hydraulic transmission Jack out of the way.
CAUTION
The wood pieces must be in place on mainbeam between the two straight pins
before sliding the steering plate from the transmission jack onto the mainbeam or
damage to pins my result.
Be sure chains do not contact hydraulic or pneumatic lines along the mainbeam or
damage to equipment may result.
8.
Make sure wood pieces (19) are located on mainbeam between two straight pins (18).
9.
Maneuver steering plate (13) over mainbeam (14) and into alinement over two straight pins (18).
10.
Using lifting device (15), carefully lower steering plate (13) onto wood pieces (19).
11.
Remove chains (16) from steering plate (13).
12.
Position lifting device (15) above platform where curbside and streetside service covers were removed.
5-65
