TM 9-2330-381-14
NOTES:
1. ALL DIMENSIONS ARE IN INCHES.
2. DIMENSIONS WITHOUT TOLERANCES ARE NOT CONSIDERED CRITICAL.
3. REMOVE ALL BURRS AND SHARP EDGES.
4. FABRICATE FROM: TUBE STEEL, ROUND ASTM-A513 5 3/4 (5.750) IN. DIA. X 1/4 (.250) IN WALL TAB
NSN: STEEL, PLATE, C-1045 1/4 (.250) IN. THICK.
5. ALL MACHINED SURFACES SHOULD HAVE A MINIMUM OF 125 FINISH.
6. MAKE ALL WELDS PER AWS-1.1.
Figure F-4. Bearing Seating Tool (T4249)
Change 1 F-5
