TM 9-2330-383-14&P
1-10. LOCATION AND DESCRIPTION OF MAJOR COMPONENTS (CONT)
u. Access Steps (Curbside). One foldable access step (23) is mounted inside the
curbside short side panel and two foldable access steps (24 and 25) are mounted on
the front bulkhead, curbside, and a handle (26) is mounted on the front bulkhead
curbside above the steps, to permit ready access to the front deck area when HEMAT
is loaded.
1-11.
EQUIPMENT DATA
Dimensions
Height (empty) .............................
57 in. to top of side rail
72 in. over spare tire
34 in. to top of floor
Length .....................................
309 in.
Width ......................................
98.4 in.
Ground clearance (empty) ...................
14.7 in., front axle, bias ply
tires
14.4 in., front axle, radial tires
20.2 in., box beam, all tires
Weight
Empty ......................................
11,000 lbs
Payload ....................................
22,000 lbs
Tires
Size
Bias ply .................................
15 x 22.5
Radial ...................................
385/65R22.5
Inflation pressure
Bias ply .................................
100 psi highway/65 psi off-road
Radial ...................................
105 psi
Plies ......................................
10, sidewalls
11, tread
Tread design ...............................
Traction road lug
Axles
Manufacturer
Front ....................................
Westport Axle
Rear .....................................
Systems & Electronics Inc.
Capacity ...................................
16,900 lbs, front and rear
Type .......................................
Straight air
Brakes
Manufacturer ...............................
Eaton
Type .......................................
Drum 16-1/2 x 5 in.
Suspension
Manufacturer ...............................
Ridewell
Air bags ...................................
Firestone
Electrical system .............................
24 Vdc
Negative ground
Fire extinguisher .............................
Amerex Corp.
Dry chemical
1-6
Change 1